How to install ceramic tile bullnose trim

However, in some cases, you'll need a bullnose tile that has more than one rounded corner. For example, the corners of a tiled wall may require a rounded edge on the top and side for a finished look. Double bullnose tiles have two rounded edges, and can serve as the perfect trim material in these situations.

Measuring Bullnose Tile Bullnose tiles are often sold individually, and they must be measured carefully. Sketching your tile design ahead of time may help you visualize where you'll need to use bullnose tiles. When you're ready to measure, determine the length of the tiled area, such as a backsplash or tiled accent wall, where unfinished edges will show. Next, check the tile specifications for the design you've chosen and note the length of the bullnose tiles that match.

For example, if the bullnose tiles are available in inch-long sizes, then you would need one for each foot you measure. For a baseboard-type border, you'll need to measure the open wall space and count on placing one row of bullnose tiles around the room. For instance, a simple byfoot room would require 32 bullnose tiles if each tile is 12 inches one for each foot of wall space.

Bullnose tiles are a great option for finishing your tile design and hiding rough edges. They also work to protect corners, and they function well when used as a baseboard or as decorative trim. When planning your tile project, don't forget to include this tile type to finish off the look. Related Information.

All the Trimmings. First of all, you need to apply the tile adhesive to the counter's edge with the help of a caulking gun. Tiles having a flat back, including bullnose tiles, are moved directly into the adhesive on the edge. Tiles having an "open" back, for instance, V-caps and sink rails, are protected on the back with an extra layer of mortar in a process, which is usually known as back buttering. The tiles are then moved onto the counter's edge. Bullnose Installation If you are planning to install bullnose tiles around the perimeter of a shower or at the highest or uppermost point of a wall of tiles, then the bullnose can be set using the same method that you use when installing the rest of the tiles.

The mortar is untangled or arranged by drawing a comb through it, with the indented side of the trowel out to the edge of where the tiles, or edge pieces, will be placed or fixed. The bullnose tiles are put down into the mortar at a slight angle, before being twisted straight into place. If the bullnose is being put down or laid into a tight area, then they can be back buttered or have the mortar applied to their backs before the installation process.

Specialty Trim Installation Bullnose tiles are not the only trim options that are available for walls. They all install the same way, however. They are laid before the rest of the counter is tiled. First the tile adhesive is applied to the counter's edge with a caulking gun. Do small areas to start with to avoid having the adhesive dry too soon, recommends How to Specialist. Tiles that have a flat back, such as bullnose tiles, are pressed directly into the adhesive on the edge.

Tiles that have an "open" back, such as V-caps and sink rails, are covered on the back with an additional layer of mortar in a process known as back buttering. The tiles are then pressed onto the counter's edge. If you're installing bullnose tiles around the perimeter of a shower or at the top of a wall of tiles, the bullnose can be set using the same method used to install the rest of the tiles.

The mortar is combed with the notched side of the trowel out to the edge of where the tiles, or edge pieces, will be installed.