Installing dog door in french door

Here are some steps on how you can install a dog door in a hollow-core door: Measure your dog size. Remove the door from the wall and place it flat on a table.

Outline the template according to the height and width of the dog. Drill holes in each of the four corners of the template. Saw the dog door along the blade marking. Remove the cut piece and file down the insides. Insert the frame and check if the measurements are correct. Insert interior and exterior frame of the dog door. Tighten the screws and reattach the door. How Do You Remove the Door? You can replace one or more panes of glass to make room for a pet door.

Some customers will enlarge the opening by cutting into the side or footer of the door. MaxSeal doors are ordered based on the opening that they will be installed into. If you are replacing a single pane of glass, simply measure the exposed glass as you see it; this will be the opening where the pet door is installed.

If you want a larger pet door than the glass panes in your door, simply measure the opening you need. You can also cut into the footer or the side molding. Another option is the French Door Glass Panel. This insert will go with plastic frames on French panel doors. Get either a single or a dual flap.

These pet doors are custom-made to fit one or several window panes in a French Door. They are made based on the exposed glass of the pane the pet door is to be inserted.

When using more than one glass pane, please contact our office to determine the right size. We also offer doors that are larger than what is shown in the above chart; please get in touch with us for assistance. Measuring and installing your French door pet door is very simple. You must have individual panes of glass that are removable.

You cannot cut an opening into a single-solid pane of glass, because it will shatter. Older French doors with a single glass pane will not support a MaxSeal pet door; you will need to find a different spot where to fit one of our pet doors unless you are willing to replace the existing French door. Due to the frame of the door itself. If you measure your pane of glass as 10"w x 10"h, then your pet door will have a flap that measures 8"w x 8"h.

Glass exposed on back door? Outside frame to outside frame? There are two main options for sliding glass door dog doors. This method would require hiring a glazier to measure and install your glass.

For both options, you would want to measure the height of your dog from top of shoulder to floor to determine the size of the pet door that would best fit them. I would like another double paned glass panel as well. Just added to your cart. Continue shopping. FREE U. Close search. Stephen Daily December 27, Grace Staff December 23, Grace Staff October 12, Brad Massey October 11, Hi Julie! Please email us at customerservice petdoors. Grace August 6, Just not sure if it is worth replacing the entire door.

Thanks , Julie. Leave a Comment Name. How much is:. If your door has individual panes of glass, you can simply get one or more glass pieces removed and replace it with a custom-built dog door that perfectly fits inside the hole you have created. The number of glass pieces that you will have to get removed depend on the size of your dog.

For a large dog, you will have to remove more than one glass panes or perhaps cut into the door frame to accommodate your French doors pet door. Let us go into the detail of the installation process for each. The foremost thing to do is to measure your dog from feet to shoulder. We would suggest you take the measurements twice to make sure you have the correct numbers.

This would help you to get the perfect door flap size to suit your dog. It is highly recommended to hire a local glazier who can cut the glass pane for installing the dog door. It is not a DIY task, so make sure you let a professional take charge.

It is important to note that dog doors, in general, have different ranges of thickness. To choose the most suitable one, you should consider checking the thickness of the glass pieces of your French door for determining the perfect fit. After cutting the dog door-sized glass piece from your French door, the glacier will install the dog door and put everything back together to give the final finish. The steps to installing a dog door in a French door that has multiple glass panes are as follows:.

Measure your dog from feet to shoulder. This will allow you to get a dog door that is comfortable for your dog to pass through. For confirmation, retake the measurements to ensure that you get the ideal door frame size for your pet. Take a good look at your multiple-paned glass French door.