Sony hcd mg310av manual

Related product manuals. When is my volume too loud? A volume above 80 decibels can be harmful to hearing. When the volume exceeds decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration. Can bluetooth devices of different brands be connected to each other? Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos? Record the serial number. Refer to them whenever you call upon your Sony dealer. Model No. Ask a question. Related product manuals. When is my volume too loud? A volume above 80 decibels can be harmful to hearing. AC voltmeter 0. To Exposed Metal Parts on Set. Check leakage as described below.

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0. Leakage current can be measured by any one of three methods. A commercial leakage tester, such as the Simpson or RCA. A battery-operated AC milliammeter. The Data Precision Measuring the voltage drop across a resistor by means of a.

VOM or battery-operated AC voltmeter. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. See Fig. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- diation exposure. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc.

During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emis- sion, observe from more than 30 cm away from the objective lens.

This unit is able to display the test data character information written in the CD on its fluorescent indicator tube.